{"product_id":"2pcs-6-5-inch-cloth-speaker-cone-rubber-surround","title":"2PCS 6.5\" Cloth Speaker Cone 155mm Black – Rubber Surround Recone Repair Part","description":"## 2PCS 6.5\" Cloth Cone with Rubber Surround – Recone Repair Parts\u003cbr\u003e\n\u003cbr\u003e\nThis listing is for a pair of 6.5 inch speaker cones: black cloth cone bodies\u003cbr\u003e\nwith the rubber surround already bonded on. Two cones, so you can rebuild both\u003cbr\u003e\ndrivers in a cabinet at the same time and keep the pair matched.\u003cbr\u003e\n\u003cbr\u003e\nCloth cones are the sound of a lot of vintage and pro audio drivers – warm in\u003cbr\u003e\nthe mids, controlled breakup up top, and a bit more forgiving than a stiff\u003cbr\u003e\npaper cone. Paired with a rubber surround, you get long throw and an edge that\u003cbr\u003e\nwon't rot the way foam does.\u003cbr\u003e\n\u003cbr\u003e\n### Dimensions (each cone)\u003cbr\u003e\n\u003cbr\u003e\n| Item | Specification |\u003cbr\u003e\n|---|---|\u003cbr\u003e\n| Nominal size | 6.5 inch |\u003cbr\u003e\n| Outside diameter | 155 mm ±2mm |\u003cbr\u003e\n| Surround inner diameter (cone opening) | 140 mm ±2mm |\u003cbr\u003e\n| Depth | 32 mm ±2mm |\u003cbr\u003e\n| Center hole (voice coil hole) | 26 mm ±1mm |\u003cbr\u003e\n| Cone material | Cloth, black |\u003cbr\u003e\n| Surround material | Rubber |\u003cbr\u003e\n\u003cbr\u003e\n*Measure with callipers before ordering. A part that reads 153mm or 157mm is\u003cbr\u003e\nwithin spec.*\u003cbr\u003e\n\u003cbr\u003e\n### Will It Fit Your Speaker?\u003cbr\u003e\n\u003cbr\u003e\n- **Outside diameter (155mm)** must clear the basket's inner lip and mounting\u003cbr\u003e\n  holes. If your frame opening is smaller than 155mm, this cone won't drop in.\u003cbr\u003e\n- **Center hole (26mm)** is the one you can't fix later. Measure your voice\u003cbr\u003e\n  coil former's outer diameter – it should be a close slip fit, tight enough to\u003cbr\u003e\n  self-centre while the glue sets.\u003cbr\u003e\n- **Depth (32mm)** sets how the cone sits in the frame and whether the dust\u003cbr\u003e\n  cap clears the pole piece.\u003cbr\u003e\n- **Both cones in this pack share the same batch**, so the pair will match.\u003cbr\u003e\n\u003cbr\u003e\n### Fitting Notes\u003cbr\u003e\n\u003cbr\u003e\n1. Remove the old cone and clean the frame and voice coil former.\u003cbr\u003e\n2. Dry-fit the new cone and check the coil centres in the gap without rubbing.\u003cbr\u003e\n3. Apply a thin, even bead of adhesive at the rubber-to-frame edge and around\u003cbr\u003e\n   the coil former at the centre hole.\u003cbr\u003e\n4. Let it cure fully before playing any signal.\u003cbr\u003e\n\u003cbr\u003e\n### FAQ\u003cbr\u003e\n\u003cbr\u003e\n**How many cones do I get?**\u003cbr\u003e\nTwo. Enough for a stereo pair of 6.5\" drivers.\u003cbr\u003e\n\u003cbr\u003e\n**Does this include voice coils, spiders or dust caps?**\u003cbr\u003e\nNo – cone and rubber surround only. You reuse your existing coils and spiders.\u003cbr\u003e\n\u003cbr\u003e\n**Is this for 6\" or 6.5\"?**\u003cbr\u003e\nIt's a 6.5\" cone (155mm OD). It may suit some 6\" drivers, but only if your\u003cbr\u003e\nframe opening and 26mm centre hole match. Measure your old cone rather than\u003cbr\u003e\ngoing by the nominal size.\u003cbr\u003e\n\u003cbr\u003e\n**Why cloth instead of paper?**\u003cbr\u003e\nCloth is lighter and more damped, so it keeps the midrange smooth and tends to\u003cbr\u003e\nsound closer to the original driver.\u003cbr\u003e\n\u003cbr\u003e\n### Package Includes\u003cbr\u003e\n\u003cbr\u003e\n- 2 × 6.5\" black cloth cone with rubber surround","brand":"DIYMars","offers":[{"title":"Default Title","offer_id":53517078659383,"sku":"CB17331-#6-2PCS","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0894\/5562\/4503\/files\/57_ae45771d-ae5c-4913-8db9-8dc4f0fe6ac3.jpg?v=1793843582","url":"https:\/\/www.diymars.com\/products\/2pcs-6-5-inch-cloth-speaker-cone-rubber-surround","provider":"DIYMars","version":"1.0","type":"link"}