{"product_id":"155mm-cloth-speaker-cone-6-5in-rubber-surround","title":"6.5\" Cloth Speaker Cone 155mm Black – Rubber Surround Recone Repair Part","description":"## 6.5\" Cloth Cone with Rubber Surround – Recone Repair Part\u003cbr\u003e\n\u003cbr\u003e\nThis auction is for a single 6.5 inch speaker cone: a black cloth cone body\u003cbr\u003e\nwith the rubber surround already bonded on. If your woofer's cone is torn or\u003cbr\u003e\nthe original edge has perished, this lets you rebuild the driver instead of\u003cbr\u003e\nscrapping it.\u003cbr\u003e\n\u003cbr\u003e\nCloth cones are the sound of a lot of vintage and pro audio drivers – warm in\u003cbr\u003e\nthe mids, controlled breakup up top, and a bit more forgiving than a stiff\u003cbr\u003e\npaper cone. Paired with a rubber surround, you get long throw and an edge that\u003cbr\u003e\nwon't rot the way foam does.\u003cbr\u003e\n\u003cbr\u003e\n### Dimensions\u003cbr\u003e\n\u003cbr\u003e\n| Item | Specification |\u003cbr\u003e\n|---|---|\u003cbr\u003e\n| Nominal size | 6.5 inch |\u003cbr\u003e\n| Outside diameter | 155 mm ±2mm |\u003cbr\u003e\n| Surround inner diameter (cone opening) | 140 mm ±2mm |\u003cbr\u003e\n| Depth | 32 mm ±2mm |\u003cbr\u003e\n| Center hole (voice coil hole) | 26 mm ±1mm |\u003cbr\u003e\n| Cone material | Cloth, black |\u003cbr\u003e\n| Surround material | Rubber |\u003cbr\u003e\n\u003cbr\u003e\n*Measure with callipers before ordering. A part that reads 153mm or 157mm is\u003cbr\u003e\nwithin spec.*\u003cbr\u003e\n\u003cbr\u003e\n### Will It Fit Your Speaker?\u003cbr\u003e\n\u003cbr\u003e\n- **Outside diameter (155mm)** must clear the basket's inner lip and mounting\u003cbr\u003e\n  holes. If your frame's opening is smaller than 155mm, this cone won't drop in.\u003cbr\u003e\n- **Center hole (26mm)** is the one you can't fix later. Measure your voice\u003cbr\u003e\n  coil former's outer diameter – it should be a close slip fit, tight enough to\u003cbr\u003e\n  self-centre while the glue sets.\u003cbr\u003e\n- **Depth (32mm)** sets how the cone sits in the frame and whether the dust\u003cbr\u003e\n  cap clears the pole piece.\u003cbr\u003e\n- **Cone opening (140mm)** is where the surround meets the cone body – useful\u003cbr\u003e\n  for checking against your old part.\u003cbr\u003e\n\u003cbr\u003e\n### Fitting Notes\u003cbr\u003e\n\u003cbr\u003e\n1. Remove the old cone and clean the frame and voice coil former.\u003cbr\u003e\n2. Dry-fit the new cone and check the coil centres in the gap without rubbing.\u003cbr\u003e\n3. Apply a thin, even bead of adhesive at the rubber-to-frame edge and around\u003cbr\u003e\n   the coil former at the centre hole.\u003cbr\u003e\n4. Let it cure fully before playing any signal.\u003cbr\u003e\n\u003cbr\u003e\n### FAQ\u003cbr\u003e\n\u003cbr\u003e\n**Does this include a voice coil, spider or dust cap?**\u003cbr\u003e\nNo – cone and rubber surround only. You reuse your existing coil and spider.\u003cbr\u003e\n\u003cbr\u003e\n**Is this for 6\" or 6.5\"?**\u003cbr\u003e\nIt's a 6.5\" cone (155mm OD). It may suit some 6\" drivers, but only if your\u003cbr\u003e\nframe opening and 26mm centre hole match. Measure your old cone rather than\u003cbr\u003e\ngoing by the nominal size.\u003cbr\u003e\n\u003cbr\u003e\n**Why cloth instead of paper?**\u003cbr\u003e\nCloth is lighter and more damped, so it keeps the midrange smooth and tends to\u003cbr\u003e\nsound closer to the original driver. It's also what many vintage and pro\u003cbr\u003e\nwoofers used.\u003cbr\u003e\n\u003cbr\u003e\n**Rubber or foam surround?**\u003cbr\u003e\nRubber lasts far longer and handles heat and humidity better. Foam is softer\u003cbr\u003e\nand lighter but perishes over time.\u003cbr\u003e\n\u003cbr\u003e\n### Package Includes\u003cbr\u003e\n\u003cbr\u003e\n- 1 × 6.5\" black cloth cone with rubber surround (as selected)","brand":"DIYMars","offers":[{"title":"Default Title","offer_id":53517082722615,"sku":"CB17331-#6","price":7.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0894\/5562\/4503\/files\/57_bb50002d-9e60-4007-bc52-65c0fd6a2e50.jpg?v=1793843802","url":"https:\/\/www.diymars.com\/pt\/products\/155mm-cloth-speaker-cone-6-5in-rubber-surround","provider":"DIYMars","version":"1.0","type":"link"}