Brand New 180uF 450V Snap-in Aluminum Electrolytic Capacitor – 25×30 / 25×40mm

100% brand new polarized 180µF (180MFD) aluminum electrolytic capacitor, snap-in mounting, rated 450V DC. Compact Ø25mm body with 30mm or 40mm height options, standard 10mm pin pitch. Low ESR, high ripple current, 105°C temperature rating. Designed for space-constrained power supplies, LED drivers, industrial control boards, and audio preamplifier power stages.

Specifications

Capacitance	180µF (180MFD), ±20%
Voltage Rating	450V DC
Mounting Style	Snap-in, through-hole PCB
Case Sizes	Ø25×30mm / Ø25×40mm
Pin Pitch	10mm standard
Temperature Rating	105°C (85°C versions available)
Lifetime	2000h–5000h @ rated temperature
ESR	Low-impedance grade
Polarity	Polarized – negative stripe marked

Size Comparison

• 25×30mm: Most compact, fits tight chassis. Typical for LED driver, ballast, compact SMPS.
• 25×40mm: Taller can, higher ripple handling, longer life. Same footprint, check height clearance.
• Both: Ø25mm diameter + 10mm pitch = drop-in for standard mini snap-in layouts.

Compatible / Cross-reference

• Nichicon: GU / GG mini series equivalents
• Rubycon: USG / HXH compact series
• EPCOS / TDK: B43501 compact series
• Chemi-Con: KMR / KMH mini series
• Jianghai: CD29H compact equivalents

Typical Applications

• Compact SMPS bulk capacitor after rectifier
• LED driver power supply filtering
• Electronic ballast and fluorescent driver
• Industrial control board power section
• Audio preamplifier / phono stage power supply
• Small inverter and UPS auxiliary supply
• Vintage equipment repair (replaces aged compact snap-ins)

Installation Notes

• Confirm PCB hole spacing = 10mm and body diameter ≤25mm clearance.
• Observe polarity: align negative stripe with PCB "−" marking.
• Do not bend pins more than 15° from vertical.
• Soldering: ≤260°C, ≤10 seconds per pin.
• Allow vent clearance: minimum 3mm above top of can.

Condition & Quality

100% brand new, dry-stored in climate-controlled environment. No bulge, no leak, leads straight, ESR within specification. Each unit visually inspected. RoHS-compliant series available on request.